Pinball Machines

This machine was given to me and has been. Kept in storage for a year. Know too much about these machines as i was never into pinball.

From what i see on the web and in looking at. This is the game with rudy the talking. The goal of the game is to advance. The clock and at midnight rudy goes to sleep and you can score a lot of points. But rudy will antagonize you throughout the.

Game getting angry if you move the clock. This game is in need of some repair and restoration, but not think it is in bad shape. Outer cabinet is pretty good, the colors are all vibrant, but there are a few.
Places where paint has chipped on sides of tower. The back glass and transparency is bright and. Vibrant with no rips or tears. The play surface is fairly dirty, but there are.
Some good cleaners and waxes that can fix this up, there are no apparent. Scratches or wear areas, and the colors are bright. Plugging it in and play it, i noticed that the flippers do not seem to work. Most all of the lights are working and the. Led score and message area works well. Ran it through a few test mode and the electronics and menus all appear to good order. But not being a pinball. Repair man i can not tell you what they mean. I removed the glass and started. Hitting the targets by hand and they all seem to work. Lifting up the play surface i noticed one of.

They did not come back. The rubbers probably need replacing, as not a lot of tension on them when touching a couple of them. Rudy’s mouth goes up and down as if he is talking. And he gets real mad if you hit him in the jaw but i did not see his eyes. The game comes with a manual, but it looks like it is a copy. Pinball aficionado or are good at restoration and electronics, micro switches, solenoids and wiring, i think this game can be fixed up to be a real gem. I do not have the knowledge or skill to.

1954 gottlieb hawaiian beauty pinball machine. Everything pops, scores, and rings like it should! This is a special “double” award game. Also included: original flyer, original schematics, and a copy of pingame journal magazine issue#115 from april, 2006 featuring a photo of the hawaiian beauty backglass on the cover. You can get a quote from. Please see below for further details. The playfield is in really good shape. It was stripped down of all of its parts including the wood upper and lower aprons. Then i applied several coats of johnson paste wax and buffed out the playfield the best i could. Please remember it is over 55 years old, so needless to say it is not perfect. Like i said, it is really nice. All screws and metal parts have been buffed and shined and come with new finishing washers. Take a look at the photos. All mechanical parts for the flippers, sling shots and thumper bumpers were cleaned and polished. All of the copper coil sleeves were also cleaned and polished. The playfield has several new parts including all new bumper caps and bumper skirts, along with all new rubber, new flipper bats and a new ball shooter gauge. Bumpers #1,2,3,4,5 and the two 100,000 bumpers have new bumper bodies.

The thumper bumpers have the original gottlieb old style bumper bodies. I have installed a brand new set of reproduction playfield plastics from the shay arcade group. Also included is a brand new tray liner for the apron. A new grounded power cord has also been installed.

It has the original backglass in very good condition. I would rate it a solid 8 or better. The cabinet is in original condition. It is in better than decent shape, but it does show signs of wear and tear from 55 years of use and abuse. Overall, it is a good cabinet. It looks like the previous owner did some touch up here and there, but nothing major. Please look at the photos and see for yourself. The coin door has the original and complete 5-cent heath coin chute unit and credit button, both in fine working order! A new lock (with keys) has been installed. The heath unit, door hinge, and other coin door hardware has been buffed and shined! You are always free to ask me any questions you may have. These are the original wooden legs. They have been sanded smooth, then re-stained.

To finish them off, i sprayed them with varathayne clear gloss. All of the original leg bolts and washers have been buffed and polished to a beautiful shine! The legs have their original leg brace bolts at the top of each leg. I have installed brand new 2-inch leg leveling feet. I use north american van lines. They do a great job. The machine will arrive at your door fully assembled and ready to plug in and play!

I suggest you get a quote from them first. You are also welcome to use any shipper you choose. You pay me for the machine, and the rest is up to you. I will make sure the machine leaves my possession safely. Don’t waste your time, and don’t waste my time!

Additional photos are available upon your request. With no guarantees or warranties implied. I have no control over what happens to this machine after it leaves my possession.

Cabinet paint is original with a few. A sliver of wood is missing from the back of the head. Backglass is very nice with a few minor paint imperfections.

Playfield is nice with some minor paint wear. Up for sale today is an unshopped classic gottlieb machine… We rarely sell unrestored games, but due to overwhelming demand, we. Occasionally offer one at a severely reduced. We get many requests to sell games as-is for the budget-minded.

Electro-mechanical pinball machines because they were the best playing and. This game came in on trade towards another fully restored classic. Have so many machines lined up to go through the shop that we could use the.

Extra space and that’s why we’re offering this game for you at a rare special. The game powers up and lights up, but the score motor continually. Runs upon power-up, which is typical of a game. That sat unused for many years.

Pick-up at my location is free. You can call us in the 610-917-2359 or on the cell at 484-744-0615 if you have any questions! Check out what else is in the.

1957 gottlieb hi-diver wood rail pinball machine. All i can say about this machine is that it is in great shape and is working 100% perfectly. No wear spots on playfield, no broken plastics, great back glass with minimal missing paint. It has not been modified in any way.

Wiring is as it was from the factory and all mechanical parts and mechanisms are working 100%. One flipper obviously has been replaced at some point as the letters are reading incorrectly but are functioning 100%. You will however want to replace the rubbers as i did not have enough to do the entire machine (some are white and some black). I have however replaced all burned out bulbs and put a coat of pinball wax on the playfield. The cabinet has minor scratches on it but nothing major.

I also have all of the original documentation including score and instruction cards and schematic. This game is fun to play and a perfect machine for the collector. Any questions please let me know.
I will also load more pix early in the week.

This machine is in very good condiition as you can tell by the photo’s. When plugged in, it does light up but i can’t get it to do anything. It worked fine and then one day it didn’t. I don’t know enough about pinball machines to mess with it. It also has the manual.

I will be happy to answer.

Pinball ” wizard ” the who ’s tommy ! The colors are still so bright ! The playfield has almost no wear at all , just maybe were the ball kicker throws back out the ball !

Way less than typical ! The amazing art work on this back class is in great shape ! No peeling or flaking or chips or scratches ! No touch up paint at all on the play field !

Just a few touch ups on the ouside cabinet to hide a few scratches when i 1st bought this many years ago ! Always taking care of !! Always waxed and cleaned !

And only played in my home the past 20 years ! I also kept covered to prevent fading and dust ! Real pride of ownership ! This is a very fun (old school) electro-mechanical pinball machine ! With all the bells and chimes and feel and lights ! This wizard machine was inspired by the 1975 hollywood movie tommy ! That stared roger daltry & ann-margret and they look great on the orig backglass as well !

This machine operates on quarters and still has the orig coin box ! Can be played by 1 to 4 players ! Comes with all the orig keys ! I also have the orig owners manual as well ! This is a must sell right away for me ! Look at all the photos ! This pinball machine will be a great investment ! This pinball machine was built very well and with pride in chicago ill. I had it insured and aprraised for 5,000.00 some years ago.

Wonderful indiana jones - the pinball adventure by williams with very low play. It has been in our collection ever since and as the pictures show the condition is second to none. The pictures pretty much describe this game and its condition. I would have liked to include more exterior shots of the cabinet, but finally decided this is probably what most people would want to see.

For those of you who know steve no further explanation is necessary, and for those who don’t well you just have never seen a pin work better than factory new. Now he wants to bet the farm.

Should make for an interesting last 12 seconds.

This baseball pinball machine is fantastic, with brilliant colors, and works great and has been in storage for around 30 years when the back glass was damaged. We oiled all the rotating shafts and checked out the operation. As you can see, the playfield is mint. The bat is new as well as the playfield back marque. Game shows strikes and outs on two of the back glass display areas. Animated 3d area with moving players that pop up and move according to the loading of the bases. “with 2 outs and the bases loaded, any hit is considered to be a “grand slam home run.
Pinch hitter allows player with lowest score to overcome the other players’ lead. Runs scored previous high score spell. This is a two player game that “pitches” either curves or straight balls. The legs are the original red.

Spare parts such as a box of bulbs (lamps), new ramps, bats, replacement batter solenoid and a. Copy of the original schematic.

Sti (a division of american van lines) has good rates and excellent service. The dimensions are 25″ wide by 68″ long (front to back leg bottoms) by 72 high which depends the leg adjuster position.

The weight is approximately 275 to 300 lbs. We are currently restoring the very rare genco hi-fly wood rail pinball. If you are interested in that or have any questions please call 303 841 5360 m-f 10am to 6pm mountain time.

Appears to be a 110 volt american machine. Missing the power cord end. Head appears to be missing one small circuit board and one of the digital displays. Machine does power on with working lights, sound, and flippers but does not play. Cabinet is in very good condition. There is no head glass but i do have the head graphics sheet to go with the machine. Does have a head lock with the key. Playfield is nice and clean and looks to be complete but check my close-up pics for yourself. Get more for your items.

If you need any and all info please ask……