Pinball Machines

   
   
   

  Their rates are usually around $350 within 1500 miles of 44070 and around $420 everywhere else in the continental 48. This is a super popular, classic, collectible, family friendly pinball machine with awesome artwork and a magic theme. This is by far thee most collectible and fun pinball machine made in the last 30 years next to addams family, twilight zone, and indiana jones(i also have a williams indiana jones pinball machine available). This machine is a true collectors piece that has only gone up in value. This machine is loaded with great features like levitating ball, rotating trunk, spirit ring, tiger saw multiball, trunk multiball, trunk multiball with vanish lock, magna save, and many, many more great features. Machine has just been cleaned, serviced, and is working 100%. The playfield is in fantastic condition with no wear visible. Playfield has just been cleaned, new rubber bumpers added, burnt bulbs replaced, plastics cleaned, and new pinballs added. Cabinet is in nice condition with a few small chips on head and some tiny screw holes on left lower cabinet side.

Comes with locks and keys ready to plug and play. If you have been looking for one of these machines then don’t pass this one by. You can’t go wrong with this great coin op item.

There will be no guarantees on the working condition of this machine after it leaves since these machines sometimes need adjustments after they have been moved and you are also dealing with used electronics. Mbianchi at precision-nal dot com.

If you have been looking for a nice kiss pinball this is the one for you. This is a fully restore kiss pinball machine made by bally in 1979. I have been working on this machine off and on for about three years. When i bought the machine it was non working with a very faded cabinet.

It came with an excellent original backglass with no imperfections and a very nice playfield. The playfield has some minor wear right in the center not much at all but check out the pictures. I have done the following to this machine. Installed a brand new rectifier board. Installed a brand new altek mpu. Installed a rebuilt sound board. Sanded the entire cabinet down, repaired any blemishes and restenciled the entire cabinet. The cabinet is truly amazing. It looks like it did back in 1979. Polished all steel parts and tumbled all the smaller metal parts. Refurbed the coin door and legs(and leg levelers). Totally shopped with new rubbers, light bulbs, targets, etc. It came to me very nice and i put a ton of work into it. The game plays 100% with all the correct sounds, etc. I’m offering this machine starting at. 99 cents with no reserve.

   
   
   
Was an arcade and the 2. And current owner has had this game since 1995 and in 2004 put new rubber & had the game tuned-up & touched-up. Carved scores on black trim painted. Back panel is not in photo’s but present.

I will answer them promptly. All items are carefully packed by experienced shippers.

I have another pin coming and need the space, also a chance to finish the floor where it and my twilight zone are sitting. Any questions feel free to ask. I bought this pin in 2005 from a the mid-west.

All stainless steel hardware used when replacing topside. New trunk will come packed w/ pin. With pin and is pretty beat. Tiger saw mod: mounting bracket for saw painted flat black, black plastic spacer w/ stainless steel hardware used for tiger plastic. Ramp was cut to allow room for the saw blade motor to sit lower modified. Bracket and used spacers at mounting point to achieve this allowing the saw. The entrance to this ramp is cracked. Reversible: remove spacers, tweak bracket for proper alignment and put a new. Ramp on it and it’s back to normal. Added light socket w/ orange led at shooter lane. General illumination at flipper return lanes, also orange led’s. New legs, levelers, plastic leg protectors and leg bolts.

(stainless steel button head allen bolts). Replaced ball trough housing for trapdoor. This is called exactly, but it’s the housing that locks the balls and shoots. About a year ago i took apart the trunk gearbox, removed. All the old grease which had the consistency of caramel and replaced w/.

Led’s: gi bulbs are not led except shooter lane and flipper. Led’s used in inserts and flashers. Frosted for modes and such lower.

I’m not sure if coindoor is original, i don’t see a serial. Number sticker, but maybe it didn’t come w/ one. Also, a little touch up was. Done around coin slots by previous owner. Comes w/ manual, coinbox and mechs.

   
  
I did install a brand new display, translite looks great and has one tiny scratch that i can see. All plastics look good, and everything seems to be working great. Game can be played and seen in person at bene pizza and retroarcade, omaha.

   

   
 Their rates are usually around $350 within 1500 miles of 44070 and around $420 everywhere else in the continental 48. This is a very popular, classic, collectible, family friendly pinball machine with awesome artwork and is themed off the tv series, ‘gilligan’s island’. Machine has just been cleaned, serviced, and is working 100%. The playfield is in good condition. There are some broken plastics. Playfield has just been cleaned, new rubber bumpers added, bulbs replaced, plastics cleaned, and new pinballs added. Cabinet is in good condition with some normal wear from possible route. Comes with locks and keys ready to plug and play. This is a great machine to add to any gameroom and perfect for any pinball player. If you have been looking for one of these machines then don’t pass this one by.

Mbianchi at precision-nal dot com.

   
   


  Their rates are usually around $350 within 1500 miles of 44070 and around $420 everywhere else in the continental 48. This is a very popular, classic, collectible, family friendly pinball machine with awesome artwork and is themed off the comic strip hero and movie flash gordon. Machine has just been cleaned, serviced, and is working 100%.

I cleared this area to keep it from getting any worse. I have added a picture of the rear of glass.

There is also a free play button on front of cabinet next to coin door. Coin door has a dent. Comes with locks and keys ready to plug and play. This is a great machine to add to any gameroom and perfect for any pinball player.

   
   
  Their rates are usually around $350 within 1500 miles of 44070 and around $420 everywhere else in the continental 48. This is a very popular, classic, collectible, somewhat family friendly pinball machine with awesome artwork.

Depicts hugh hefner with 1976 playmate patti mcguire and 1977 playmate sondra theodore. Machine has just been cleaned, serviced, and is working 100%. The playfield is in very nice condition with minor wear which is hard to find on any playboy pinball since they were played to death.

Playfield has just been cleaned, new rubber bumpers added, bulbs replaced, plastics polished, and new pinball added. Backglass is pretty much mint although some paint has pulled away from the glass in small spots only where hugh and the girls are. I have taken a closer picture of this area, although it is very hard to see. There is no flaking, cracking, chipping, crazing of the backglass.

You can’t go wrong with this great coin op item. I have bowlers, jukeboxes, video arcades, and other pinballs as well. Thanks for looking and good luck. I will not be held responsible for any problems that may occur once machine leaves my home.

There will be no guarantees on the working condition of this machine after it leaves since these machines sometimes need adjustments after they have been moved. Mbianchi at precision-nal dot com.

The power ball is a unique ball that is made out of ceramic instead of steel. It weighs less than the regular balls and therefore can do some amazing tricks on the playfield.

Being ceramic it also is not affected by the magnets which makes for some terrific play. The playfield is in excellent condition with no broken plastics. The cabinet colors are nice and bright. I have replaced worn rubber and burnt bulbs have been replaced. Also, included is a brand new factory twilight zone pinball owners manual, and a toolbox full of extra bulbs, spare parts, and polish.


Bally TWILIGHT ZONE Collector Classic Arcade Pinball Machine - rec.games.pinball Archive and posting Gateway
Similar Threads. \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n 01-31-12, 1040 PM\r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n\r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n\r\n \r\n\r\n\r\n\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n…

Recent searches

• old pinball machines

Be sure to go to the links to 46 pictures and 2 videos. This machine is from a non-smoking, pet free home. Please excuse all reflections from the camera flash and outside light.

Please note: this machine includes the bill ung mini saucer led kit. I don’t usually add any mods to my pinball machines but, in my opinion, the mini saucer led kit is an absolute ‘must’ for attack from mars. Wow, what a difference it makes! As you will see from the pictures and the 2 video links, the machine is in superb original condition. The playfield is absolutely fabulous, with just a small amount of wear at the shooter lane, where the ball pops out.

As you can see, there is no visible wear at the ’stroke of luck’ hole and a protector is in place, to keep it wear free. However, i have never removed the protector, so i cannot guarantee that there is zero wear. There is no wear to be seen with the protector in place. All inserts are perfect, with no chips whatsoever. There is slight fade on the cabinet but, apart from the slight fade, the cabinet is fabulous and is in absolutely superb condition!

As you know, most cabinets have lots of dings and gouges, along with numerous areas that have been touched in. That is not the case here. I see only a couple of tiny marks, that probably won’t even show on the pictures. The boards are all perfect, with matching numbers. There are no hacks and no burnt connectors.

The batteries have been changed on january 1 each year. There is absolutely no battery acid damage. The green martians are perfect. The strobe light works perfectly.

Motorized 3 drop target works perfectly. The ramps and plastics are all in super condition, except for one plastic at the very back of the playfield that has a very small break. When playing the machine, this small break is totally hidden from view by the main saucer and does not affect game play in any way. The dot matrix display (dmd) was replaced with a brand new one. It is very bright and every pixel lights perfectly.

The playfield has been cleaned and waxed. The machine plays lightening fast with absolutely no errors. The cashbox and coin acceptors are included. It is one of the most sought after pinball titles in history. It will be sorely missed. I have taken 2 videos of the pinball machine.

If you think the pictures look good, just wait until you see the actual machine. It will blow you away! I have seen many attack from mars pinball machines but none have come close to this one. If you have been searching for an attack from mars, in superb original condition, this is the one for you. You may know that a. Dot matrix display is now available for ‘attack from mars’. Just go to for full details. The color dmd looks absolutely amazing and puts ‘attack from mars’ into a whole new realm! The most desirable pinball ever, just got even better!

Not many can claim that! If you are in se florida, you are most welcome to come by and inspect the pinball machine. I cannot pack or crate this item, so i suggest you use a ‘door to door’ shipper. I have used north american van lines on many occasions and have never been disappointed. They will come to my house, blanket wrap the pinball machine and deliver to your door. For a quotation, call them on 800-959-8880 (extension 2) and tell them that they will be picking up from boynton beach, fl 33473.

The pinball is on the ground floor, with no stairs and easy access. I have described everything as honestly as i can. You will not be disappointed.