Pinball Machines

Beautiful 1995 williams jackbot jack-bot pinball no res. Click to view image album. Check out the 28+ attached pictures.

Look very closely at the pictures as this machine is really that nice and they are not easy too find anymore. Someone went through the painstaking effot to recolor the cabinet, check out the pictures, they did a great job on it. Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new beautiful mirror glaze pinballs, custom instruction cards and much more! Check out the amazing lot of pictures i attached of this game (sorry dialup users, it’s going to take a while to load, there are over 28+ pictures attached of this game) she’s a data east 1992 lethal weapon 3 pinball machine. The game itself works perfect and circuits are 100%. The physical outside cabinet is in great shape as is the playfield as you can see from the pictures. Check out the pics as they tell the tale. Bring the fun of an awesome movie theme and soundtrack right into your living room or gameroom, she’s as much fun to look at as to play! Allot of toys this one has!

If your local, come on by and take a look at it if you like. Please note: this was not done at the time of listing, this shop job has about 6 months on it.

All the pins we sell go through the same process pretty much and here’s a general breakdown on what we do…. Playfield teardown - parts on top of the playfield including bulbs, assemblies, wireform ramps, plastic ramps, pop bumper caps, apron, etc are all removed from the game to expose playfield surface. Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced. Air flow grates cleaned and inspected. Wires wiped and connectors and shileding checked.

Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done. Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted. Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified.

Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality. Final assembly & test - full function test again and played! Best part of the restoration process! Game is left on for 2 - 3 days to verify new bulbs are good hey, even new bulbs can burn out, it does not happen often but it can happen and we check for that! If they don’t after the first day then they will last thier full expected life. She just had the following recently installed (about 6 months ago): all new soft-flex rubbers / all new expensive mirror glazed premium pinballsâ® installed and 10 coats of wax (for super fast ball play) everything inside was checked out and working perfect!

There are reasons why some folks take thier pictures in the dark and it’s not because they can’t find a clamp on light. We have a ultra high resolution camera. You can get in depth details of this pinball and just about any other at (which stands for internet pinball database). The following were comments made about the game….. Has to be one of the most fun games i have ever played.

Kids love this game, hard enough to challenge any adult, great artwork. I edited my original rating because this machine is rated lower then the other two. Out of the three machines jack bot is the best and it’s not close. I was not overly impressed when first checking out this game. I thought it was ‘ok’ but nothing special. I decided to pull the trigger and get one as i did enjoy pinbot. Well, i can tell you this game has more than meets the eye! Very challenging to achieve mega-visor and doing well at casino run isn’t a given either. Williams did an excellent job of reviving the pinbot and adding a theme. If you are going to play jackbot as a standard pinball machine you have chosen to play the wrong machine. If you like casinos and gambling this machine is for you. This machine litterly plays as a glorified casino with a few skillful shots to start it. The mega visor makes the game play more like an advanced pinbot. However for the gamblers the casino run makes the game 45 seconds of free play. During this time you can make as many shots to the socer or eye sockets for another spin on the joker wild like bonus slot machine. Much like the devil in the old show if the bomb appears (and remains) you lose it all. The cabinet art work is humerous picture of pinbot and bride of pinbot doing the famous hand gesture from “god creates adam” by michelangelo. The funny part is pinbot has a ace of club up his sleve which is actually used in the game to cheat. The playfield mechanically is the same as pinbot the biggest difference is in some of the inserts and the playfield art.

I like the changes from pinbot including newer technology, 3 ball multi ball, and the difference in artwork. I can’t say that i’d pick either jackbot or pinbot as one “better” than the other. However, if my pinbot ever dies, i’d replace it with a jackbot for the newer technology. Jackbot has so many great features, the spiral skills shot to start the game, the unique way to obtain multiball, fun and challenging skill shots, and one of the best shots of any machine to earn jackpot. Bought this late model williams on it’s neatness factor. I didn’t think much of it at first, but it’s really turned out to be a great challenging game. Excellent for the home environment, because it’s hard to beat, though it does have some tricky outlanes. Love the sexy female robot along with the striking artwork. I can only think of one other machine built in 95′from bally/williams that i’d also like to possess, maybe two. New high security gold lock (installed after pics). New polished leg bolts (installed after pics). New polished leg levelers (installed after pics). 10 coats of wax for super fast ball play!
- you won’t believe how fast the ball rifles around on this one! General check-up of all boards and circuits. Most charge $275 to $350 for this service from point to point - not us!

For this if need be and we can get an exact quote for you, it varies to the point we can’t really make a flat rate offer on it but historically it usually runs around $250 total, we will do or best to get the cheapest price for you. They are a huge ltl carrier and have terminals at or near 99% of major cities and airports.

Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it. After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also. All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! For fastest processing of this order, please use vendio checkout! More than just a pretty picture. Get free counters from vendio today!

They are built like tanks. This is the last game they made before going out of business. This game is fairly rare with only 1000 of them being made.

This specific one is in awesome shape, with no wear on the playfield. When we got the game it only had 1400 plays on it. There is no way to prove it only had 1400 plays, but we think the condition shows it. Just look at how clean the inside of the cabinet is. The game was totally stripped of parts, and i don’t just mean the ramps. Everything was taken off the topside and cleaned. All new incandescent light bulbs were installed to ensure reliability, not just the burned out ones. Everything was polished and cleaned, with all new white rubber. The ball troughs and ramps were also removed from the underside of the playfield to be cleaned. Some people skip this step and it doesn’t take the game long to get dirty again. Also all of the inserts have had brand new led’s installed, it really makes the inserts pop.

If you haven’t seen led’s before in a game, they really make a big difference, and they really stick out at you. All your friends will go nuts when they see you have a pinball machine in your house. The game plays perfect and looks awesome. You will not be disappointed in this game. I don’t think you will find a nicer barb wire game.

This game is super heavy, so please keep that in mind. This machine is in hope michigan 48628.

Beautiful 1997 williams no good gofers pinball no res! Click to view image album.
This is a domestic u. Freshly rebuild / shopped playfield! Check out the 60+ attached pictures. Full fresh rebuild, brand new display installed. Ready for years of use!
Outstanding condition 1997 williams no good gofers pinball machine w/ many brand new parts! Fresh and ready for years of use!

Look very closely at the pictures as this machine is really that nice and they are not easy too find anymore. Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new levelers, pincushions and gold leg bolts, new beautiful mirror glaze pinballs (4), custom instruction cards & brand new display installed and much more! Check out the amazing lot of pictures i attached of this game (sorry dialup users, it’s going to take a while to load, there are over 60+ pictures attached of this game) she’s a williams 1997 no good gofers pinball machine. The game itself works perfect and circuits are 100%. The physical outside cabinet is in great non-faded shape as is the playfield as you can see from the pictures (albeit some roughage under the slam ramp but that always happens there) the slam ramp has the open modification so that the outpost is not used which usually gets in the way of the ramps.

It’s kind of frustrating too play with it there so the slam ramp has been modified not to use or need it, if you want to revent back to the original way you always can. Check out the pics as they tell the tale. Bring the fun of an awesome golfing theme and funny soundtrack right into your living room or gameroom, she’s as much fun to look at as to play! Allot of toys this one has!
If your local, come on by and take a look at it if you like. All the pins we sell go through the same process pretty much and here’s a general breakdown on what we do…. Playfield teardown - parts on top of the playfield including bulbs, assemblies, wireform ramps, plastic ramps, pop bumper caps, apron, etc are all removed from the game to expose playfield surface. Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced.

Air flow grates cleaned and inspected. Wires wiped and connectors and shileding checked. Underside playfield cleaned and checked, wirelooms, inserts cleaned, mechanical parts inspected and connections verified. Clean and wax playfield - hand clean with dust free surgical cloths and a non-abrasive cleaner (not sprayed on), usually takes 2-3 times over until cloths no longer show any dirt. All drop targets, stationary targets, posts and misc metal and plastic parts are done as well that remain on playfield.

Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done. Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted. Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified.

Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality. Final assembly & test - full function test again and played! Best part of the restoration process! Game is left on for 2 - 3 days to verify new bulbs are good hey, even new bulbs can burn out, it does not happen often but it can happen and we check for that! If they don’t after the first day then they will last thier full expected life. She just had the following installed: all new white soft-flex rubbers / all new expensive mirror glazed premium pinballs® installed and 10 coats of wax (for super fast ball play) everything inside was checked out and working perfect! Check out the bunch of pictures i attached as pics say 1000 words. All ramps and playfield parts were disassembled and cleaned.
The flippers were checked out and adjusted so they fire like cannons and perfectly symetrical every time. The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on. Sorry i attached sooooo many pictures over 60+ pictures! But they show it all and i want you to see for yourself what an outstanding machine this really is. Anybody can say anything about a pinball machine but sooo few have pictures to back it up. The coin door has double coin slots for currency and a slot for a dollar bill acceptor. It’s the original factory door i believe. There are reasons why some folks take thier pictures in the dark and it’s not because they can’t find a clamp on light.

This will be most helpful if you ever have to track down what went where if you take something apart. Pic sizes run around 2 to 3 meg before compression just for one pic so they have to go on cd. As far as we know no one offers this along with the pins they sell.

You can get in depth details of this pinball and just about any other at (which stands for internet pinball database). The following were comments made about the game….. I played a number of tables before deciding on ngg as a good one to own. It has so much going for it, but it does not have a cult following so some people will dismiss it without giving it a chance. I love the light show and the soundtrack (played loud - the new high score music is great, and “dance party” mode is real fun), but it is the rules and game play that make the table so appealing.

As with many lawlor tables you can have a good game without being too accurate - but better skill is rewarded too. As you get better the table rewards you with extra phrases and features.

Not an easy pin to master by any stretch. Simply put ngg is a blast! Recently added to my modest home collection. One of the last williams ’s a shame of the low prod run and the under exposure it has. This game has it all. Great quality audio and funny speech. Terrific light show and fantastic flow with plenty of depth. I personally like the artwork, very coluorful, which doesn’t take it’s self too has a clever layout too. P lawlor’s last one with williams. A highly recommended very late model wms that can be had for less.
The gophers talking smack to you all the time makes the game fun. Having the ability to smack them and shut them up (for a couple of seconds anyways) is cool.
Having the opportunity to hit a hole-in-one via the slam-ramp shot is priceless!! The rule set is deep which will cater to the high-end players, but there’s enough “easy-to-attain” stuff to keep the kids interested. Have now owned ngg for almost three months. It is a superb, underrated game and the deep rule set means that even after all this time it still maintains my interest and keeps calling me back for “one more go”. Its certainly one of my top five and a game i shall keep for a long time. Getting a hole-in-one is so satisfying and so is hitting one of the gofers!! Everything fits into the basic idea so well, that you get carried away by the flow. Shoot the gofers and hit the hole-in-one for the “biggies”! Different feel than the other lawlor masterpieces.
Give it a try and you won´t be disappointed! New high security gold lock. New polished gold leg bolts. New white soft-flex rubbers (all of them). All new flashers throughout entire machine.

General check-up of all boards and circuits. Most charge $275 to $350 for this service from point to point - not us! For this if need be and we can get an exact quote for you, it varies to the point we can’t really make a flat rate offer on it but historically it usually runs around $250 total, we will do or best to get the cheapest price for you. They are a huge ltl carrier and have terminals at or near 99% of major cities and airports. If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code).

Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped. Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it. After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also.

All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! For fastest processing of this order, please use vendio checkout! More than just a pretty picture. Get free counters from vendio today!

Beautiful 1997 sega starship troopers pinball machine! Click to view image album. This is a domestic u. Check out the 28+ attached pictures. Ready for years of use! Outstanding condition 1997 sega starship troopers pinball machine w/ many brand new parts! Fresh and ready for years of use! Look very closely at the pictures as this machine is really that nice and they are not easy too find anymore, most in this condition are in collectors hands. Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new levelers, new leg bolts, new beautiful mirror glaze pinballs (4), custom instruction cards and much more! Check out the amazing lot of pictures i attached of this game (sorry dialup users, it’s going to take a while to load, there are over 28+ pictures attached of this game) she’s a sega 1997 starship troopers pinball machine. The game itself works perfect and circuits are 100%. The physical outside cabinet is in great shape as is the playfield as you can see from the pictures check out the pics as they tell the tale. Bring the fun of an awesome movie theme and soundtrack right into your living room or gameroom, she’s as much fun to look at as to play!

Playfield teardown - parts on top of the playfield including bulbs, assemblies, wireform ramps, plastic ramps, pop bumper caps, apron, etc are all removed from the game to expose playfield surface. Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced. Air flow grates cleaned and inspected. Wires wiped and connectors and shileding checked. Underside playfield cleaned and checked, wirelooms, inserts cleaned, mechanical parts inspected and connections verified. Clean and wax playfield - hand clean with dust free surgical cloths and a non-abrasive cleaner (not sprayed on), usually takes 2-3 times over until cloths no longer show any dirt. All drop targets, stationary targets, posts and misc metal and plastic parts are done as well that remain on playfield. Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done. Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted.

Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified. Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality.

She just had the following recently installed (about 6 months ago): all new black soft-flex rubbers / all new expensive mirror glazed premium pinballs® installed and 10 coats of wax (for super fast ball play) everything inside was checked out and working perfect! Check out the bunch of pictures i attached as pics say 1000 words. All ramps and playfield parts were disassembled and cleaned. The flippers were checked out and adjusted so they fire like cannons and perfectly symetrical every time. The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on. Sorry i attached so many pictures over 28+ pictures!

It’s the original factory door i believe. There are reasons why some folks take thier pictures in the dark and it’s not because they can’t find a clamp on light.
We have a ultra high resolution camera. You can get in depth details of this pinball and just about any other at (which stands for internet pinball database). The following were comments made about the game….. Firstly, anyone who says starship troopers is not fun, needs to go to the doctors!! If u have played a starship troopers, that is set up correctly, and is in good condition, you will find it fun and challenging. And really entertaining to say the least… Every single person who has played mine at my house says one thing…. I have a dozen different pinballs now, and this is a great machine.

Some people always compare every machine to a twilight zone or a star trek next gen, thats fine,, but get serious. Every machine is fun and excellent in its own right. You will have to look far and wide to find any machine that is as fun and exciting as when starship troopers multiball kicks in… The various large lights flash, the dot matrix video screen looks great and you can tell that something exciting is about to happen.

I was referred to my starship troopers by a 50 year old pinball tech who has been in the industry for over 20 years. And he was not wrong. Starship troopers is fun and exciting. The audio is excellent on my machine.

Screaming bugs, people yelling “kill them all”… Lots of audio including “we neeeeedddddddd soldiers”…. The video diplay of the bugs killing people, the death toll numbers rising numerically like there has been a nuclear war,,,, come on man, this pin is bloody excellent !!!! This machine has great dot-matrix video/graphics…

The brain bug pops up for an added effect and overall, very popular with friends n family… If u see a starship troopers, grab it… Backboard a bit boring but is themed well… Overall, a definate keeper !!! I hate to break your bubble…
I bought this machine and stuck it between whitewater and theater of magic and guess which machine got the most attention. Lots of cheap toys but the backglass is simply stunning. Who would have thought that a cheap tube could get that much attention. Perhaps pinball ought to move to hdtv? It’s embarrasing to spend thousands on a classic and some sega game steals your thunder. Sometimes when its late at night (too late to play pinball without waking the neighbours) i just stand for a minute and look at the playfield. Really bright and colourful and covered in cool static official starship troopers toys. It features a fair range of the usual items 3 pop bumpers / 2 slings / a couple of sinkholes that lead to a kickout scoop / kickout hole / 2 ramps which can either return to the flippers on fast shots or drop out onto playfield locations on slow shots.

/ large loop around the back / several static targets there are 2 magnets at the rear of the playfield to catch balls in the loop for ball lock. The playfield lacks a laser kickback as found on williams / de games, which is a shame, but then again there is a ball save timer to protect you against premature drains. A unique feature is the one of the most notable features of the playfield is the 3rd mini flipper, which is inline with the normal right flipper.

At first it may seem a little pointless (except for the double scoring on bugs) but it makes shots at the all-important recon scoop and the nuke kickout hole much easier to attain. Who could miss the giant brain bug that pops out of the playfield, that will certainly surprise you the first time you see it. Lastly we will finish off mentioning the other unique feature which is the 4 led displays in the playfield that tell you how many of each bug you have left to kill. Gameplay: for a beginner, this machine can be frustratingly difficult. I get mad with the number of balls i loose down the centre (mostly from poor shots at the ramps) even with a tilt that sends the machine 3 foot across the room you cant save the ball from the middle (hence why they have a timed ball saver i assume) the ruleset is deep and complex.

That said this is an ideal game for intermediate to pro players and it really will keep you going for a long time. It will be a long long time before i make it to the last planet thats for sure! So what do i love about the gameplay. One of the first things i like is the absolute clear understanding of what you are aiming for. You have a light telling you which planet you are on, you have led displays to tell you how much of each bug you have left to kill and you have lights on the ramps to tell you which ramp/loop you have hit or need to hit.

Really simple clear main objectives! Everyone loves multiball and this machine really likes to give you multiball, there are several different ways to activate the different multiball modes, this is where you rack up the points! Second time i have owned this pinball. I found another one in excellent condition and could not resist it. Artwork on playfield including the giant bugs is outstanding.

The start of the multi-ball is wonderful. The sounds are first rate and the voice tracks from michael ironside are great. The dmd animations and graphics are very nice. Love the convex back box.
The digital scoring on playfield when you kill the bugs is a nice touch. The third little flipper is a very nice innovative feature.
The brain bug is a cool toy and feature too. What can i say, i loved the movie because it doesn’t take itself seriously.
The parody quality of the movie is very much incorporated into the total design. If i could have rated it higher i would have done it. An all action game in the mould of games like getaway. Unnusual in that its a 90’s game and not mode based. It is a fun and a challenging game but i feel the sounds should have been more varied and the build quality could have been better e. The small flipper takes a while to master. One of sega’s best efforts with a unique play field and 6 player play! All action pinball machine that reflects the spirit of the film. The full on agressive play may not suit all but thats the whole point. Its not supposed to be taken seriously-its a blast like getaway attack from mars or black knight 2000. Outstanding game for a sega! New high security gold lock. New polished gold leg bolts. 10 coats of wax for super fast ball play! - you won’t believe how fast the ball rifles around on this one!

If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code). Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped. Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it. After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also. All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! For fastest processing of this order, please use vendio checkout! More than just a pretty picture. Get free counters from vendio today!

This game is in excellent condition. Pinball glass and cabinet are in great condition. The playfield has some wear but gives the game a nice vintage feel.

This is one of the funnest pinball machines to play.

Beautiful 1997 williams no good gofers pinball machine. Click to view image album.

Check out the 60+ attached pictures. Full fresh rebuild, brand new display installed. Ready for years of use! Outstanding condition 1997 williams no good gofers pinball machine w/ many brand new parts!

Fresh and ready for years of use! Look very closely at the pictures as this machine is really that nice and they are not easy too find anymore, most in this condition are in collectors hands. Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new levelers, pincushions and gold leg bolts, new beautiful mirror glaze pinballs (4), custom instruction cards & brand new display installed and much more! Check out the amazing lot of pictures i attached of this game (sorry dialup users, it’s going to take a while to load, there are over 60+ pictures attached of this game) she’s a williams 1997 no good gofers pinball machine.

The game itself works perfect and circuits are 100%. The physical outside cabinet is in great non-faded shape as is the playfield as you can see from the pictures (albeit some roughage under the slam ramp but that always happens there) the slam ramp has the open modification so that the outpost is not used which usually gets in the way of the ramps.

Allot of toys this one has! If your local, come on by and take a look at it if you like.

All the pins we sell go through the same process pretty much and here’s a general breakdown on what we do…. Playfield teardown - parts on top of the playfield including bulbs, assemblies, wireform ramps, plastic ramps, pop bumper caps, apron, etc are all removed from the game to expose playfield surface.

Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced. Air flow grates cleaned and inspected.

Wires wiped and connectors and shileding checked. Underside playfield cleaned and checked, wirelooms, inserts cleaned, mechanical parts inspected and connections verified. Clean and wax playfield - hand clean with dust free surgical cloths and a non-abrasive cleaner (not sprayed on), usually takes 2-3 times over until cloths no longer show any dirt. All drop targets, stationary targets, posts and misc metal and plastic parts are done as well that remain on playfield.

Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done. Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted. Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified.

Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality. Final assembly & test - full function test again and played! Best part of the restoration process!
Game is left on for 2 - 3 days to verify new bulbs are good hey, even new bulbs can burn out, it does not happen often but it can happen and we check for that! If they don’t after the first day then they will last thier full expected life. She just had the following installed: all new white soft-flex rubbers / all new expensive mirror glazed premium pinballs® installed and 10 coats of wax (for super fast ball play) everything inside was checked out and working perfect! Check out the bunch of pictures i attached as pics say 1000 words.

All ramps and playfield parts were disassembled and cleaned. The flippers were checked out and adjusted so they fire like cannons and perfectly symetrical every time. The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on. Sorry i attached sooooo many pictures over 60+ pictures! But they show it all and i want you to see for yourself what an outstanding machine this really is.

Anybody can say anything about a pinball machine but sooo few have pictures to back it up. The coin door has double coin slots for currency and a slot for a dollar bill acceptor.

I love the light show and the soundtrack (played loud - the new high score music is great, and “dance party” mode is real fun), but it is the rules and game play that make the table so appealing. As with many lawlor tables you can have a good game without being too accurate - but better skill is rewarded too. As you get better the table rewards you with extra phrases and features.
“hole in one” always feels good! Lots of challenging shots including the slam ramp upper play-field shot. Great light show and sound effects.


Those pesky wise guy gofers have a lot to say! Not an easy pin to master by any stretch. Simply put ngg is a blast!
Recently added to my modest home collection. One of the last williams ’s a shame of the low prod run and the under exposure it has. This game has it all.

Great quality audio and funny speech. Terrific light show and fantastic flow with plenty of depth. I personally like the artwork, very coluorful, which doesn’t take it’s self too has a clever layout too. P lawlor’s last one with williams.

A highly recommended very late model wms that can be had for less. The gophers talking smack to you all the time makes the game fun. Having the ability to smack them and shut them up (for a couple of seconds anyways) is cool.

Having the opportunity to hit a hole-in-one via the slam-ramp shot is priceless!! The rule set is deep which will cater to the high-end players, but there’s enough “easy-to-attain” stuff to keep the kids interested. Have now owned ngg for almost three months. It is a superb, underrated game and the deep rule set means that even after all this time it still maintains my interest and keeps calling me back for “one more go”.

Its certainly one of my top five and a game i shall keep for a long time. Getting a hole-in-one is so satisfying and so is hitting one of the gofers!! Everything fits into the basic idea so well, that you get carried away by the flow. Shoot the gofers and hit the hole-in-one for the “biggies”! Different feel than the other lawlor masterpieces.

Give it a try and you won´t be disappointed! New high security gold lock. New polished gold leg bolts. New white soft-flex rubbers (all of them). All new flashers throughout entire machine.

10 coats of wax for super fast ball play! - you won’t believe how fast the ball rifles around on this one! General check-up of all boards and circuits. Most charge $275 to $350 for this service from point to point - not us!

For this if need be and we can get an exact quote for you, it varies to the point we can’t really make a flat rate offer on it but historically it usually runs around $250 total, we will do or best to get the cheapest price for you. They are a huge ltl carrier and have terminals at or near 99% of major cities and airports. If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code). Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped.

Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it. After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also.

All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! For fastest processing of this order, please use vendio checkout! More than just a pretty picture.

Get free counters from vendio today!

Nice condition 1979 williams gorgar pinball machine w/ many new parts! Fresh and ready for years of use! Rebuilt playfield and perfect working sound and displays! Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new leg bolts, new beautiful mirror glaze pinballs, custom instruction cards and much more! Check out the amazing lot of pictures i attached of this game. She’s a williams gorgar pinball machine. The game itself works perfect and most new bulbs installed topside, underside, backglass and circuits are 100%. The physical outside cabinet is in great shape as you can see from the pictures. Check out the pics as they tell the tale.

Bring the fun of an awesome taling pinball with the heartbeat right into your living room or gameroom, she’s as much fun to look at as to play! All the pins we sell go through the same process pretty much and here’s a general breakdown on what we do….

Underside playfield cleaned and checked, wirelooms, inserts cleaned, mechanical parts inspected and connections verified. Clean and wax playfield - hand clean with dust free surgical cloths and a non-abrasive cleaner (not sprayed on), usually takes 2-3 times over until cloths no longer show any dirt. All drop targets, stationary targets, posts and misc metal and plastic parts are done as well that remain on playfield. Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done.

Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted. Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified. Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality. Final assembly & test - full function test again and played! Best part of the restoration process! Game is left on for 2 - 3 days to verify new bulbs are good hey, even new bulbs can burn out, it does not happen often but it can happen and we check for that! If they don’t after the first day then they will last thier full expected life. Please note: the backglass looks good from the front and the pics turned out nice but it was touched up on the back with red and orange spray paint (not by me), it does however look good from the front.

Check out the bunch of pictures i attached as pics say 1000 words. All ramps and playfield parts were disassembled and cleaned. The flippers were checked out and adjusted so they fire like cannons and perfectly symetrical every time. The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on. Check out the pics as they show it all and i want you to see for yourself what an outstanding machine this really is. Anybody can say anything about a pinball machine but sooo few have pictures to back it up. There are reasons why some folks take thier pictures in the dark and it’s not because they can’t find a clamp on light. This will be most helpful if you ever have to track down what went where if you take something apart. Pic sizes run around 2 to 3 meg before compression just for one pic so they have to go on cd. As far as we know no one offers this along with the pins they sell. You can get in depth details of this pinball and just about any other at (which stands for internet pinball database).

The game is fun to play but i only gave the game a play rating of 7 because it just can’t compare to the more modern games. There’s no multi-ball, no ramps, no unique “toys”, nothing special to separate this game from others of its generation.

This is one game i wish they would do a remake on, incorporate some of the above features because the theme is perfect for pinball. A true classic from williams. From the snake pit to the drop targets, one of my favorites. Plays exceptional fast and never gets boreing. One day i’m kicking it’s butt and the next day gorgar beats me!

Anything but 10 for the audio is a huge understatement and an insult, luckily some people have undertood it too. Gorgar, the first talking pinball is and allways will be a legend. What is most thrilling part is that it’s not only gorgar’s voice that makes audio of this game ahead of its time, but also the heartbeat that get’s closer and closer the more time you spend on the playfield. Add constantino mitchell’s best artwork to theme and you are ready to have game experience that really gives you something true, rather than wastes your time with useless efforts of entertainment.

Although the playfield and the gameplay is not on the same level as the art and audio, you cannot say anything bad about it either. It may be a hard game to master, but isn’t that something you look forward from a pinball… I know someone who has this and, when it’s party time, it’s the hit of the party along with the punch bowl. I first came across this pin in the winter of 79-80 in a bar in phoenix. I promptly dropped in a handfull of quarters and the game drained the ball rather quickly and also my quarters. But the sound, especially the heartbeat got me hooked.

1 or 2 hundred dollars worth of quarters and many evenings later, i was finally winning games on it. I loved the game, the somewhat simple rules, sounds, art, playfield all of it. I guess you would have to remember a majority of the pins were still em back then. And this one even had sound, albeit somewhat limited by todays standards. However this is one of those games that i will always remember.

Bought it from lincoln uk after it was used in a school play as a prop. Mechanically sound, but electronically dead. A good clean and wax, several repairs to the driver, cpu and power board, and gorgar speaks!!! The speech is awesome for the era, and the magnasave is a neat feature.

A game which can be played for fun, or if you know the rules, seriously. 1979 williams gorgar pinball machine! New high security barrel lock (installed after pics). 10 coats of wax for super fast ball play! - you won’t believe how fast the ball rifles around on this one! General check-up of all boards and circuits. Most charge $275 to $350 for this service from point to point - not us! For this if need be and we can get an exact quote for you, it varies to the point we can’t really make a flat rate offer on it but historically it usually runs around $250 total, we will do or best to get the cheapest price for you. They are a huge ltl carrier and have terminals at or near 99% of major cities and airports. If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code). Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped. Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it.

After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also. All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! For fastest processing of this order, please use vendio checkout! More than just a pretty picture.

Beautiful 1995 stargate the movie pinball machine nr. Click to view image album. Fresh playfield and outstanding surface condition! Full fresh rebuild, ready for years of use! Domestic machine - not a re-import!! “transport yourself to another dimension”. Great condition 1995 gottlieb stargate the movie pinball machine w/ many new parts!

The game itself works perfect and most new bulbs installed topside, underside, backglass and circuits are 100%. The physical outside cabinet is in great shape as is the playfield as you can see from the pictures. Check out the pics as they tell the tale. Bring the fun of an awesome movie and soundtrack right into your living room or gameroom, she’s as much fun to look at as to play! Allot of toys this one has!

In some modes this can be repeated and player can hit another jackpot to release one more ball, for a total of 4 balls. A “pyramid” is the main feature of this game. It has a top that opens by raising and lowering. The “glidercraft” will zigzag left-right, in front of the pyramid, with about 90 degrees of horizontal movement. This game also features two “horus” targets.

The game occasionally raises them, allowing the player to temporarily make the shots. All the pins we sell go through the same process pretty much and here’s a general breakdown on what we do…. Playfield teardown - parts on top of the playfield including bulbs, assemblies, wireform ramps, plastic ramps, pop bumper caps, apron, etc are all removed from the game to expose playfield surface.

Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced. Air flow grates cleaned and inspected. Wires wiped and connectors and shileding checked. Underside playfield cleaned and checked, wirelooms, inserts cleaned, mechanical parts inspected and connections verified. Clean and wax playfield - hand clean with dust free surgical cloths and a non-abrasive cleaner (not sprayed on), usually takes 2-3 times over until cloths no longer show any dirt. All drop targets, stationary targets, posts and misc metal and plastic parts are done as well that remain on playfield. Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done. Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted. Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified. Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality. Final assembly & test - full function test again and played!

She recently had the following installed: all new black soft-flex rubbers / all new stainless steel playfield bolts / all new expensive mirror glazed premium pinballs® installed and 10 coats of wax (for super fast ball play) everything inside was checked out and working perfect! Check out the bunch of pictures i attached as pics say 1000 words. All ramps and playfield parts were disassembled and cleaned. The flippers were checked out and adjusted so they fire like cannons and perfectly symetrical every time. The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on.

This will be most helpful if you ever have to track down what went where if you take something apart. Pic sizes run around 2 to 3 meg before compression just for one pic so they have to go on cd. As far as we know no one offers this along with the pins they sell. You can get in depth details of this pinball and just about any other at (which stands for internet pinball database). The following were comments made about the game…..

The underside of the playfield is fully labled with diagrams and part numbers for every assembly. All of the under playfield assemblies are also easy to access and can be removed without interference from other parts or assemblies. Gottlieb did a very good job designing this pin and it really shows in the quality of how it was put together and how easy it is to work on. Awesome, awesome game by gottlieb/premier - their best by a long shot (not even close, actually). If this game had been made by williams/bally, it would be right up there with twilight zone or star trek: tng.

The art work is pretty good on the playfield and cabinet, but the translite is fantastic with the rope light and mirror effect. The sound is a mixed bag. The music is so-so (i wish they had used the actual score music from the movie) and the sound effects are pretty good. The tutorial speech can be annoying as it is very repetitive.

The rules are deep, but not frustrating or tedious. Supposedly there are 3 wizard modes, but i personally feel that only two of them are “true” wizard modes. One of them is started after completing all of the pyramid modes and the other is started after completing all of the “tasks”. Getting to both in one game is quite a feat. I won’t go into the rules (they can be read on-line), but they are really, really good.

I should also mention that it may take a few games to get used to the “feel” especially if you have never played a premier/gottlieb game. But if you hang in there, you will be rewarded with a true pinball masterpiece. I have been a huge stargate sg1 fan for years. The movie intrigued me too and when i decided to get a pin, this seemed like an obvious choice (even though the pin does not reflect the tv show). This is a very complex game. Really rich ruleset with a bunch of almost impossible shots. After a few 100 games i’m still finding new combinations or shots that i missed in prior games. It’s a challenging game and a beautiful one too. The bg is way cool and the cab is bright and clean. The graphics on the pf are great but not outstanding. It just seems like conflicting graphics quality like 2 or 3 people did the graphic design. The toy is ‘ok’ because it does not really play into the game other than moving back/forth. The mastadge (the thing on the pop bumper) is way cool as well as the horus and anubis guard figures. The habitrails make for interesting play.

It’s got a four-ball multi-ball that get’s pretty wild. This game is especially family friendly with no language or badly drawn females. One ding is the sound and i have to agree with others. The voice queues are repetitive and in some cases giving poor directions (but i think this can be disabled).

I still love this game. I’m sorry, any pin that can draw me back for two hours a day consistently is among the best, never mind that it’s not bally or williams. I dig the cool, dark space theme with egyptian accents a la the movie. The sound suffers a tad from the repeated voice calls - i’ve learned to tune them out but you can cancel the majority if you take a few seconds to do so.

The playfield is nice and open, the horus targets are cool drop-up targets! And i’m finally hitting that crazy left ramp with regularity. The play just keeps bringing me back, building up a killer advance bonus, trying to start 3x at the right time, using strategy to decide when to cash in those quartz.

And all those multiballs, wild! This has to be gottlieb’s best pin, and one of the best pins ever! If not for the non-bw haters it’d be solid top ten! First i want to say that this is the first time a vote here but i use to look on this side a lot.
Today i have eight different games (pinballs) i also have a few slotmashines and 12 jukeboxes. I thought the ratings sometime here is strange. Twilightzone in the top it is a great game but a have other games that is much more funnier and today after this weekend with a lot of friends in my house and many of them tested my pins a asked them for a evaluation and i was not supriset that the stargate was in the top toghter with games as medieval madness and an old one surf champ. The latest one i think is more that is gives some people a nostagy trip. But to be that old and have all function it have if must say its a nice game.

At first, i didn’t care too much for it, but i find myself coming back to the machine over and over again. It has challenging shots and combos and after having owned it for a while now, i still cannot complete all of them.

The multiball action is a hit with friends & relatives who drop by. This game has massive amounts of multiball that unlike other pins with this much mb, it actually becomes manageable due to the layout of the playfield. I love how most multiballs start out with two balls and then as you make a shot it adds another ball in and directs you to make a different shot. The toys are very cool and if you liked the movie stargate, then you’ll love the pinball game. Great graphics and good taunting audio. I can see why this game is consistently rated as high as it is. Edit - i have now owned this pin for almost two years.

I have twelve pinball machines now and others have come and gone. Stargate remains in the lineup. Its just too good of a game to let go.

This is one of the best games ever in my opinion. The art work is very good especially the back glass with 3d effect.

You can really get a flow going in the battle mode. I have had about ten machines and this is by far the best ss game i have ever owned. New high security barrel lock. 10 coats of wax for super fast ball play! - you won’t believe how fast the ball rifles around on this one!

General check-up of all boards and circuits. New alkaline batteries for saved scores.

They are a huge ltl carrier and have terminals at or near 99% of major cities and airports. If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code). Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped. Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it. After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also. All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! For fastest processing of this order, please use vendio checkout! More than just a pretty picture. Get free counters from vendio today!

Beautiful 1999 star wars episode 1 pinball machine nr! Click to view image album. This is a domestic u. Fresh playfield and outstanding surface condition!

Check out the 65+ attached pictures. Full fresh rebuild, ready for years of use! Brand new monitor has only 5 plays on it!

Full nos light sabre assembly! Monitor was just installed and it’s brand new along with an nos light sabre assembly! Outstanding condition 1999 williams star wars episode 1 pinball machine w/ many brand new parts! Fresh and ready for years of use! Awesome playfield condition, brand new monitor and brand new nos light sabre installed! Look very closely at the pictures as this machine is really that nice and they are not easy too find anymore, most in this condition are in collectors hands and good luck trying too get them to part with one for less than $5000 or so. Most you ever see anymore are problematic route machines that are beat up and have scratches and dents all over them. Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new levelers and leg bolts (not on machine at time of pics, they are new, never been installed pieces), new beautiful mirror glaze pinballs (4), custom instruction cards & latest firmware installed and much more!

Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced. Air flow grates cleaned and inspected.

Wires wiped and connectors and shileding checked. Underside playfield cleaned and checked, wirelooms, inserts cleaned, mechanical parts inspected and connections verified. Clean and wax playfield - hand clean with dust free surgical cloths and a non-abrasive cleaner (not sprayed on), usually takes 2-3 times over until cloths no longer show any dirt.

Final playfield - all new expensive mirror glazed pinballs and apron placards installed. Head, circuitry and boards - wires all inspected and verified. Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality. Final assembly & test - full function test again and played!

Best part of the restoration process! Game is left on for 2 - 3 days to verify new bulbs are good hey, even new bulbs can burn out, it does not happen often but it can happen and we check for that! If they don’t after the first day then they will last thier full expected life. She just had the following installed: all new black soft-flex rubbers / all new expensive mirror glazed premium pinballs® installed and 10 coats of wax (for super fast ball play) everything inside was checked out and working perfect!

The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on. Sorry i attached sooooo many pictures over 65+ pictures!

But they show it all and i want you to see for yourself what an outstanding machine this really is. Anybody can say anything about a pinball machine but sooo few have pictures to back it up.

As far as we know no one offers this along with the pins they sell. You can get in depth details of this pinball and just about any other at (which stands for internet pinball database). The following were comments made about the game…..
This is the better of the 2 pinball 2000 models. The pinball machine has some neat features and has some neat video mode games. I think the game is a little repetative and a little easy though.

Great platform, had huge potential. Game reflects the movie, super sound and art work.

Only negative is the game doesnt have a lot of shots, but does have software dept to make up for it. Hard to believe it isn’t one of the highest rated games out there. Love the integration of pinball with the video screen. One of the very best ! I love the play field there is so many things that you can do.

It seems like every time you do something you find out more. I played this pin a few times here and there and i was very impressed with it everytime. I just can’t understand why this concept wasn’t given a chance to blossom? Star wars episode i and “rfm” are definitely different from other pinballs but the sound was sensational and the art i thought was great, i especially like the vinyl compared to the painted on artwork for durability, and the lightsaber on the playfield… And darth maul duel is untouchable.

Feels like the last cry of alderaan before the death star unleashed its ultimate laser on it in episode iv. My wife and i seldomly play pinball but we are huge star wars fans so out of the three total star wars pinball machines created for the united states. We both strongly agree that this one is the most fun.

Some complain that there is not alot to do but i would beg to differ. Maybe the playfield is not bountiful with objects to hit and ramps to shoot through, but it makes up for this in its many video-modes, a feature i’m sure that will be down played by many of the past veterans. I believe this was a pinball created for the new age, meant to draw in more fans to a great past-time in pinball and vintage style arcadeing. For me and my wife, the cool effects and spectacular sound, art, did just that!! 2nd game produced using the pinball 2000 (pb2k) platform. Was also available as a conversion kit for revenge from mars. Last game manufactured by wms industries (williams and bally labels) before the announcement to close their doors on october 25, 1999. The jet bumper rule of the 1.4 software reminds players of that date. The number of points for spelling jar jar is 19,992,510; this is the date 25-10-1999, the same day wms announced the closing of their pinball branch. According to kevin o’connor at the 2004 texas pinball festival, the darth maul character in the video sequence is actually kevin himself, who trained for several weeks in stick fighting so he could be filmed against a green screen and appear in the game.
New high security barrel lock. New nos light light sabre assembly w/ transformer. New rubbers (all of them). All new bulbs throughout entire machine. All new flashers throughout entire machine. 10 coats of wax for super fast ball play! - you won’t believe how fast the ball rifles around on this one!

General check-up of all boards and circuits. Most charge $275 to $350 for this service from point to point - not us! For this if need be and we can get an exact quote for you, it varies to the point we can’t really make a flat rate offer on it but historically it usually runs around $250 total, we will do or best to get the cheapest price for you. They are a huge ltl carrier and have terminals at or near 99% of major cities and airports. If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code).

Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped. Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it.

After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also.

All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! Once it leaves my posession i can’t help what happens. For fastest processing of this order, please use vendio checkout!

Beautiful 2001 stern monopoly game pinball machine nr! Click to view image album. This is a domestic machine (not a re-import) i could not find the original coin door but i did locate it after the pics, it’s the original one with two slots, dba slot and monopoly sticker on it (yes, matching serial number too to the machine). Fresh playfield and outstanding surface condition! Check out the 20+ attached pictures.

Latest software and custom pincards installed! Ready for years of use! Outstanding condition 2001 stern monopoly pinball machine w/ many new parts! Fresh and ready for years of use! Game plays perfect and comes with a full manual, setup guide (for first time pinball owners), new levelers and leg bolts, new beautiful mirror glaze pinballs, custom instruction cards & latest firmware installed and much more!

Check out the amazing lot of pictures i attached of this game (sorry dialup users, it’s going to take a while to load, there are over 20+ pictures attached of this game) she’s a stern 2001 monopoly pinball machine. The game itself works perfect and most new bulbs installed topside, underside, backglass and circuits are 100%.

The physical outside cabinet is in great shape as is the playfield as you can see from the pictures. Check out the pics as they tell the tale. Bring the fun of an awesome board game theme right into your living room or gameroom, she’s as much fun to look at as to play!

Allot of toys this one has! All the pins we sell go through the same process pretty much and here’s a general breakdown on what we do…. Playfield teardown - parts on top of the playfield including bulbs, assemblies, wireform ramps, plastic ramps, pop bumper caps, apron, etc are all removed from the game to expose playfield surface. Inside cabinet cleaned - playfield removed from cabinet, inside vaccumed and wiped down, inside sides repainted if needed, rails scrubbed, coin door removed and rebuilt, cabinet switches checked and or replaced. Air flow grates cleaned and inspected.

All drop targets, stationary targets, posts and misc metal and plastic parts are done as well that remain on playfield. Playfield parts cleaned - hand clean all removed playfield parts with dust free cloths and hand dried (no dishwasher used at all as they can warp parts) everything is hand-done. Ramps, wireforms cleaned - hand cleaned as well, wires are wiped down and switches checked, non abrasive cleaner and hand dried. Bulbs and flashers - install new bulbs and flashers on the top side of the playfield and backbox, underneath one’s are typically just bad one’s replaced unless otherwise noted. Final playfield - all new expensive mirror glazed pinballs and apron placards installed.

Head, circuitry and boards - wires all inspected and verified. Parts replaced if needed, all tests performed, checked and re-checked. Display disassembled, cleaned and put through the test paces as well to verfiy clarity and functionality.

Check out the bunch of pictures i attached as pics say 1000 words. All ramps and playfield parts were disassembled and cleaned.

The flippers were checked out and adjusted so they fire like cannons and perfectly symetrical every time. The slingshots and pop bumpers have been set “super sensitive” - i love them set this way, if the ball just glances them they fire it off in a diffrent direction, makes gameplay soooo much better than having to have the ball hit hard and right on. Sorry i attached sooooo many pictures over 20+ pictures! But they show it all and i want you to see for yourself what an outstanding machine this really is. Anybody can say anything about a pinball machine but sooo few have pictures to back it up.

The coin door has double coin slots for currency with a dba slot and has coin mech’s already installed. She is also sporting the latest software which fixes bugs and/or adds features of the game that may have been overlooked when it was first released. Nothing like doing what your supposed to do on a pinball machine and not getting the results because of outdated software installed.

There are reasons why some folks take thier pictures in the dark and it’s not because they can’t find a clamp on light. This will be most helpful if you ever have to track down what went where if you take something apart. Pic sizes run around 2 to 3 meg before compression just for one pic so they have to go on cd. As far as we know no one offers this along with the pins they sell. You can get in depth details of this pinball and just about any other at (which stands for internet pinball database).

The following were comments made about the game….. There are easy modes like cash grab that can get a beginner excited. The skill shot is a little tricky as it requires timing and measuring distance. This was a great incorporation of the theme, from starting at 1500pts to utility payouts. My biggest complaint is you aren’t on a real monopoly board, they took out chance, etc.


It works i guess but i’d prefer the purity of the real board. Not the most appealing game, but it’s a good game. I have to admit that i didn’t have any kind of need to even try this game as it is monopoly. The theme couldn’t be any lamer, but as it came across and i gave it a try, i liked it. The music is meaningless to say at least and the art is “monopoly-art”, it’s not art. I like the shots and can’t say there is nothing wrong with the rule sheet either.

It was fun game and another pinball pat lawlor can feel proud about it. Something about this game that i keep coming back for more. Theme is good, and the artwork is nice (i love the simple cartoon look of the backglass). Rules aren’t that deep, so its fun to play. In my opinion, this is the best pinball machine made since twilight zone.
A great machine that is fun to play and has six pop bumpers. Did you get has six pop bumpers. The machine that brought stern into the limelight. Great thematic integration, and lawlor staples like the difficult side flipper shots.

Many modes, and a nice wizard mode payoff once you finish the board. I played this one a lot when it first came out, and i still enjoy it. I found it at safari land near chicago. They did not keep their pinball machines in good shape; most of the lights were out. The rotating flipper did get my ball stuck, but after about a minute, it eventually came out so do not try to dislodge it by tilting the machine! You will lose your ball and just end up dissapointed. Over all, it is a great machine, but the monopoly theme is very loosely attatched. This is such an awesome game. I liked the idea of seeing the guy with the mustache on the headboard, and it also saying “own it all” and i liked the idea of having the safe open up so you can shoot the ball inside it, and haveing a chance for multi-ball, and having a chance to toss the dice, and having the oppertunity to land on bardwalk, and earning special. New high security barrel lock. 10 coats of wax for super fast ball play! - you won’t believe how fast the ball rifles around on this one! General check-up of all boards and circuits. New alkaline batteries for saved scores. Most charge $275 to $350 for this service from point to point - not us!

For this if need be and we can get an exact quote for you, it varies to the point we can’t really make a flat rate offer on it but historically it usually runs around $250 total, we will do or best to get the cheapest price for you. They are a huge ltl carrier and have terminals at or near 99% of major cities and airports. If you have a shipper you would like to use other than overnite for a flat rate of $90 we will prep and drop off at your carrier of choice (located within 15 miles of 48183 zip code).

Everything gets wrapped in plastic, cardborded, wrapped again then secured with heavy duty ratchet straps and taped. Legs are individially cardboarded as are the balls, bolts and anything else that comes along with it.

After drop off we will contact you with the tracking info for your game, typically it will take 1 to 4 days to get there and they will call you upon arrival. If you have another game your having trouble with and you have bought one off us we will be happy to help with that also. All pinball machines come with a setup guide to help you through setup and playing for the first time exclusive trentoncoin offer! Once it leaves my posession i can’t help what happens. For fastest processing of this order, please use vendio checkout! More than just a pretty picture. Get free counters from vendio today!