Pinball Machines

The simpsons pinball party by stern pinball, inc. The adventures of america’s most colorful family, the simpsons, are transformed into a wild affair in this great pinball. The game features many of the simpsons favorite characters on a two-level playfield, complete with game modes influenced by various classic simpsons episodes.

This machine is for sale by the original owner and has been kept in excellent shape!

Original 1978 bally bobby orr pinball machine. Pinball machine was produced by chicagoâs bally company. I have had this pinball machine for 8 years it worked great till our power went out about 3 years ago and then it stopped working! When you turn it on all 00000 come up on the score board i have never tried to get it fix. My kids lost interest in the game so never got it fix. Good luck and thanks for looking! Weight: 215.00 lbs (97.52 kg).

Authentic 1978 bally playboy pinball machine. This is a full-size bally 1978 playboy pinball machine, just like the one in the playboy mansion. Wouldn’t this be the ultimate valentine’s day gift. This machine has been in our home for many years and it is in good working condition. We have not experienced any problems with it other than the need of an occasional light bulb replacement. If there is anything non-operational on this machine, we sure haven’t been able to find it.
This machine is from 1978 and has normal wear and scratch marks appropriate for a machine of its age. In addition to the normal wear and scratch marks, the pink paint on the right-hand side of the machine is sun-faded due to being situated near a window inside of our home (this machine has never been stored outdoors) and some of the rubber will probably need to be replaced within the next year or so, as minor aging of the current rubber is beginning to show. Bally electronic pinball games repair procedures manual.
This is a soft-cover 72 page book which includes schematics and part numbers. This book is dated june 29, 1978. This book looks pretty useful; however, we have never had to use it, because we have never had to repair the machine. Some of the light bulbs are for the back glass and some are for the playing field.

All of the light bulbs are for this machine. This stool is not from bally nor does it have a playboy theme.

It’s just a really nice looking vintage stool that is a good size for this machine. It looks like a stool that you would find in an arcade.

We had them sitting on top of the machine as a decoration. It must be picked up from irvine, ca 92620. We’ll do our best to answer your questions as soon as possible.

The following is an overview of the games condition issues and history. There is a crease on the playing field. The crease is in the top section by the boxer in the red/white shorts with blue gloves and the #3.

The back glass has a few minor scraths, but is not faded. There is no rear wooden cover. The game has not been played in 15 years. Before play stopped, the game worked fine. The game has always been stored in a climate controled environment. It was only moved over by the washer and dryer for the photographs. The wiring and electrical components are 100% original and have not been tinkered with by any idiots. There is no corrosion or other issues with the wiring or electrial components. The red plastic gottlieb ball cover part is broken. A plastic knob on the lower front plunger is missing. Got this following overview information from an internet site. 1950 gottllieb knock out pinball. Description: knock out, gottlieb, 12/50, 3000 produced, 2 kick-out holes, mechanical animation on the playfield of two boxers and a referee, woodrail pinball. If a knockout is scored, one of the boxers goes down, the referee counts him down, and then the box comes back out. Gottlieb knockout boxing type mechanical animation pinball. Gottlieb knock out game can win a replay by completing (operator selectible) number of knock outs (10 to 13 knockouts). Hit the center standup target for a knockout. Hit the left standup to unlight the 1-3 bumpers. Hit the right standup to unlight the 3-6 bumpers. Or just hit the individual bumpers (does not have to be in order) to unlight the bumper. Get all 1 to 6 bumpers unlit, and the knockout counter increments one. Getting 10 knockouts awards a replay and lights the side rollover lanes for a replay.

Putting the ball once over the outside rollovers increments the corresponding lower yellow static bumper from 10,000 to 100,000 points. This also increments the kickout hole values from 50,000 to 200,000 to 500,000 points. Gottlieb knock out has a safety gate between the flippers.

This comes up as the ball rolls over the switch at the top of the shooter lane. Stays up for several point hits before retracting. When the safety games goes down, the center rollover lights for a knockout.

A real part of san francisco you can see, it lqqks great for it’s age………… Overall, it works fine except that the ball return doesn’t operate……… Once restored it should lqqk and play even better………… (as you know, it’s very heavy)……………..

Route 59 #117 naperville, il 60564. Star wars vintage original pin ball machine works!
Some bulbs need to be replaced on it. No serious work done to it, everything was done by prior owner.

Balls are internal/inside and come with it. Tested: power tested, game tested see video below. Please note that we do our best to describe all damage. You may return any item within 3 days for any reason.

Please read below for further description on the item. Legs are included but not photographed. Ball ejectors do not all work but can be fixed or replaced.

Some of the bumpers above the paddles do not eject, the rubber pieces need to be replaced or fixed. Metal sensors on some of the targets need to be fixed or replaced.

Does not come with a key to open coin/electronics door. Please view photos for further details. Islands including puerto rico, virgin islands, guam, etc.

We want your item to arrive promptly and safely. Our store professionals use first-quality materials to pack items with care. Please retain all packaging and provide photos of the packaging and damage if available. Our liability, without declared value coverage shall not exceed $100.00. At isold it of naperville. It is our highest goal and best intention to provide exemplary customer service.
Open and honest two-way communication is the key. Please call our store at 630-717-0615 for. Attention regarding any issues or concerns. Monday - friday from 10:00am - 7:00pm (ct). Saturday from 10:00am - 4:00pm (ct). Isold it il0276 has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale.

I know it played fine 5 years ago, it still might. It still comes on and the lights all light up.

There is some fading on the paint. Alot of dirt on the sides. Some of the rubbers need to be replaced. I have a key to access the back of the machine but no key for the coin door, i think the lock is broken.

It shouldn’t take much too get the machine working and looking good. We will deliver the machine for 200.00 upto 150 miles from burleson, texas.

For those who haven’t played it, pinbot is an awesome game and the colors and actions at night make this unit a real treat for any game room or rumpus room! The legs have been taken off for moving and it is in fair condition, with some scuffing and dings to the corners that happened from being moved over the years and my last attempt to move it with just one other person.

It powers on and comes up with a ball waiting error message which is either the shooter lane switch is stuck or it doesn’t have any balls in it. I have not opened it up to check which one, but either one is rather simple to remedy.

If you would like to preview the machine, i have it in climate controlled storage right now in east providence, rhode island. Click to view supersize image. It’s some veneer loss, minor, but present.

1978 kiss bally pinball machine. We have had this machine in our garage for about 8 years. We played it in the garage about 5 ago and then covered it up. Now we can’t get a credit on the machine to play it. It still comes on and the lights all light up.

This machine is in very good condiition as you can tell by the photo’s. When plugged in, it does light up but i can’t get it to do anything. It worked fine and then one day it didn’t. I don’t know enough about pinball machines to mess with it. It also has the manual.

I will be happy to answer.