Pinball Machines

All original drop targets in great shape! You can see the immaculate condition of the backglass from examining the back. All the displays are perfect. Please feel free to call me anytime about this or any other game i have listed: 309-287-1725.

Then clean, scrub, and polish the playfield surface, replace all (above playfield) light bulbs with new ones. Then install all new rubber bands; then clean all the plastics and put it all back together.

The full shop-job also involves testing and adjusting every single switch, light bulb, score display, and solenoid on the machine. We get everything working electronically.
On this pin, all of the score displays not only work, but work perfectly - no missing segments; no burned up numbers. The lights, coils, and switches all work fine on this also. But keep in mind that this game is now over 30 years old.
Of the bulb sockets on the playfield and some of the switches might be a tad bit flaky from time to time. But it shouldn’t affect game play much. And the more you play it, the better things will get.

Did the guys who restored this know what they were doing? I can say with confidence that this game was reconditioned by the two most over-qualified pinball technicians anywhere. First of all, both of us are engineers from the university of il. Second, one of us (not me) actually worked at williams pinball during the boom years and even designed a game for williams (which they never produced, but stole several ideas from for other games).

Finally, both of us were previously top founding executives at a very promising internet startup company until fairly recently. One of us (me) is down on his luck, and therefore monkeying with old pinballs again. But honestly, we should be ruling the world, not replacing rubber bands on a 30 year old bally pinball machine. God works in strange and mysterious ways. So you can own a game reconditioned by two top silicon valley executives.

Physically, this game is generally in average condition. The backglass is exceptionally nice - perfect really. Still vibrant and looking like new. The head looks great too.

It has been repainted around the backglass. The playfield is a bit worn. I’ve seen much worse, but i’ve seen better too. The playfield plastics are mostly intact and are all there, but have lots of little pin-prick sized holes in the paint.

The paint has been touched up as well as possible. Bottom line: this pinball is not nice enough for a museum, but it would look and function just perfectly for a home rec room. Please check the photos above. Please note that you can click on the images for larger versions of each photo.

Anywhere in the country, although i have seen it go higher in remote areas of oregon and washington, plus about $60 if you want it delivered to your home. I can also work with north american van lines, if you prefer to use them. Their rates tend to be higher, but they do remove the need for palletizing and they will deliver to your residence for no extra charge. Games closer to 200lbs (plus pallet) are considered relatively light, and games over 300lbs are considered heavy. For this item, which will include the pallet, then rolling the game with cardboard, then covering it with stretch-film, then strapping it to the pallet, and finally covering it with “fragile” stickers. My games are wrapped extremely well…

When you pick it up. I do not guarantee that it will meet your expectations…

Ask if you have specific expectations that are not addressed above. I will then only give you my promise that it was as described when it left my shop. Once it’s out hands, i can not be responsible for any changes to its condition. I never intentionally hide anything. So please ask me if something is very important to you and i didn’t mention it in my description - let’s be safe rather than sorry.

If you have any questions about this item, please. You will then be notified and can complete the invoice at .

The non working game has the head, mini-playfield, plastics and ramps removed from the playfield but they are all accounted for in a box. The head has been tested and it does work correctly, the transformer in the cabinet has also been tested working. This game also come with lockdown bar, playfield glass and legs although they are not pictured. Working game is not shopped but plays fine, head works correctly with all switches registering, sound is fine and display is bright and has no imperfections. Both these games show cosmetic wear, are typical games not in collector shape and will need to be cleaned.

This earthshaker has been freshly shopped and restored with the following new parts. New sinking institute mod ($350). New ramps & decals ($300). New rubber all the way around. New cliffy protectors on ramps. Over $1000 spent on the restoration of this pinball machine. Plays 100% perfect, backglass is mint, by far the nicest earthshaker machine i have ever seen.
Comes with manual and key fob. I will package up or help load the machine at no charge! Located in the richmond/petersburg va area. Please feel free to ask!

This classic pinball was manufactured by bally in 1978. The game is in 100% working condition and is in great shape. There are a few minor cosmetic issues, there is a small scratch on the right side of the cabinet, the playfield has a small wear spot near the right sling shot and the back glass has some minor flaking in the bodies of the people. All of these blemishes are visible in the photos.

“indiana jones: the pinball adventure”. We have enjoyed it very much in our home. This machine is a used commercial. Machine in good condition with a little fading on the cabinet. As far as i know everything is working properly, this a great playing game.

Here is a 1993 bally williams indiana jones the pinball adventure pinball machine. This machine has been totally shopped and gone through. The machine is pretty darn close to pristine condition.

The playfield has no wear at all. It is pretty much spotless. When i got it it had 4 broken plastics. I have replaced all four plastics with bran new ones.

So, now all the plastics are perfect. What a great playing game. I understand now why this is a top 10 pinball machine. The cabinet is in really nice shape with very little fading. We i recieved the game i was unhappy with some scuffing it had on the head side art.

I installed new head side art and now it is really nice looking. The rest of the cabinet is very good with very little scratching or wear. On the left hand side of the cabinet, i left the a very small clear plastic piece that ws installed to hold the operator’s game license (look at the pictures). It looks fine so i never messed with it. The original gold on the legs had faded some, so i repainted them a very close color of gold. It has a brand new dot matix display. The machine has only been turned on for a total of a few hours with the new display.

The translite is in excellent condition. The only flaw on the playfield is that the ruins on the right side of the machine has a small chip near one of the screws holes.

Not noticable, but i took a picture of it to show the flaw. All burned buld have been replaced along with all the playfield rubbers along with a good waxing. I now that there are a wide variety of shippers available.

Otherwise, you can pick this game up at my house in dallas ga (30 miles north of the perimeter).

Just in time for christmas!!!!!!!! This is an extremely rare pinball as stern made less than 900 of these. I believe this is still the only pinball machine to date to be made with a plastic playfield. This one is even harder to find as it was one of the few that was originally built with a speech board. Machine is in good working condition. Background sounds and speech board are working perfectly. Original mpu is very clean. I did find two targets on the playfield that are not scoring. Everything else on this machine seems to be working nicely. The cabinet is very nice with some scratches here and there as shown in pictures.
The playfield will never wear. The backglass looks very nice. Playfield will be cleaned and new rubbers added before machine leaves. Don’t miss out on this hard to find pinball.

Check out the pictures and ask questions. This would make a great x-mas present. The information below was borrowed from the internet for informational purposes only. This tells you a little more about the machine and game play. (1), kick-out hole (1), 2-ball. Has a “moon surface”-like substrate. Slopes down and in towards the spinning bumpers which fling the ball away. Allowing balls to be flipped backwards and then rescued for a forward-flipping shot. The kick-out hole always tr. Aps the ball landing in it, until released for. Games had no speech but a retrofit was made available. Quote: “shoot pinball again”, spoken every time a ball is placed in the.

Add spin in addition to bounce, making the physics of the curved playfield. Difficult for the inexperienced orbitor-1 player. Is (smooth) molded plexiglas, with the moonscape surface artwork. The moonscape is lit from below by a fluorescent. Drop all the targets in the two 3-target banks to.

Drop all the “orbitor” targets and then hit all the. Orbiter targets behind them to start multi-ball, or hit the captured. Ball hard and it’ll bounce out and start multi-ball.

Had the specified minimum amount of play after his 3 or 5 balls, the. Game will continue to provide free balls until the minimum time is. Is made of a clear protective plastic cover and a rigid. Behind which are raised 3d features. The flyer refers to the spinning bumpers.

Discs can spin either clockwise or counterclockwise, depending on which. Of two spinning motors is installed. Although machine is working right now, i cannot guarantee the working condition of this machine after it leaves my home since you are dealing with used electronics. I would recommend picking up in person so you can see it working before you take it. The description provided is my opinion and may differ from yours so ask questions. Their are shippers out there like navl that will deliver door to door.

There are very many stationary and roll over targets as well. This game employees real chimes instead of electronic sounds. It comes with locks keys and the manual. Bally is well known the world over for their fun and reliable games.

Pick this up for your game room this winter and you will have a very popular place for your friends to watch the wild/gophers hockey or whatever type of sporting event. If you have kids they will love it too! If you would like a quote from 55073 scandia, mn to you, call michelle at. This is a used machine and is offered without warrenty expressed or implyed. From the pinball internet database. The internet pinball serial number database. Sports - hockey - celebrity. 3-inch flippers (2), 2-inch flippers (2), pop bumpers (3), 4-bank. (2), kick-out hole (1), star rollovers (10), up-post between flippers. First solid state game to feature dave christensen’s artwork and first solid state game with an up-post feature. 215.00 lbs (97.52 kg) comes apart for easy moving. Hi, this is a good players game but is not in collector quailty condition. There is touch up on the playing surface.

Just in time for christmas!!!!!!!! This is a fun family friendly pinball with a dragon theme. This machine is working nicely. Overall this machine is in good condition. I would consider this a players pinball.

The artwork on the cabinet has some peeling as seen in pictures. The playfield could use a good cleaning but everything is working properly. Check out the pictures and ask questions. This would make a great x-mas present. Although machine is working right now, i cannot guarantee the working condition of this machine after it leaves my home since you are dealing with an electronic machine that is 33 years old. I would recommend picking up in person so you can see it working before you take it. The description provided is my opinion and may differ from yours so ask questions. Their are shippers out there like navl that will deliver door to door.

This game is clean and plays fast. The game plays 100% with no errors.

The playfield is gorgeous with just a little normal wear at the spider hole and crate kick-out. This is some what normal, and i have seen them a lot worse. The only thing this game needs is a new set of sling shot plastics as the 2 are cracked at the bottom and it could use a brand new set of boney flippers. Machine comes complete with lock and keys and manual. This item is also for sale locally.